Table of Contents
Advertisement
CARE OF STAYCLEAN SURFACES
The back panel of the fan oven is coated with a
Stayclean finish. This should not be cleaned
manually. Aerosol cleaners must not be used
on Stayclean surfaces and must not come into
contact with elements or the door seal, as this
may cause damage.
During normal use the Stayclean coating will
become splashed with fats and food residues.
By running the oven without food, the Stayclean
surfaces burn off any soilage.
TO REMOVE THE WIREWORK
RUNNERS
The wirework runners in the grill and oven can
be removed for cleaning.
1. Remove all shelves and furniture from the
grill / oven compartments.
2. Hold the wirework at the bottom and gently
pull towards the centre of the grill or oven
compartment.
3. Unhook the runner at the top and remove it
from the cavity.
4. To replace, hook the wirework back into the
oven sides.
Ensure that the wirework runners
are firmly in place before refitting the
shelves.
CLEANING
THE
WIREWORK RUNNERS AND OVEN
FURNITURE
Soak the oven shelves, wirework runners and
grilling grid in hot soapy water if heavily soiled,
they will then clean more easily. If the shelves
are heavily soiled a soap impregnated steel
wool pad can be used.
The grill pan can be cleaned using a soap
impregnated steel wool pad.
All items of grill and oven furniture are
dishwasher safe with the exception of the grill
pan handle.
SHELVES,
SIDE PANEL
26
CAVITY
CENTRE
Advertisement
Table of Contents
