Table of Contents
Advertisement
CARE AND CLEANING
Before
cleaning
always allow the cooling fan for the
controls to cool the appliance down
before switching off the electricity
supply.
CLEANING MATERIALS
Before using any cleaning materials on your
appliance, check that they are suitable and that
their use is recommended by the manufacturer.
Cleaners that contain bleach should NOT be
used as they may dull the surface finishes.
Harsh abrasives should also be avoided.
CLEANING THE BRASS PLATED
HANDL
ES
AND CONTROLS
(WHERE APPLICABLE)
It is strongly recommended that only hot soapy
water is used for cleaning the handles and
controls. ANY OTHER CLEANING MATERIALS
WILL DULL THE BRASS PLATED FINISH.
CLEANING THE OUTSIDE OF THE
APPLIANCE
DO NOT use abrasive cleaning materials e.g
Hob Brite, Brillo pads or scourers on painted or
printed
finishes
as
Regularly wipe over the control panel and oven
doors using a soft cloth well wrung out in warm
water to which a little washing up liquid has
been added.
Do not attempt to remove any of the
control knobs from the panel as this
may cause damage.
the
appliance
damage
may
occur.
23
Advertisement
Table of Contents
