To Remove The Wirework Runners; Cleaning The Shelves, Wirework Runners And Oven Furniture; Care Of Stayclean Surfaces - Electrolux EDB710X User Manual

TO REMOVE THE WIREWORK
RUNNERS
The wirework runners in both ovens can be
removed for cleaning.
1. Remove all shelves and furniture from the
oven.
2. Hold the wirework at the bottom and gently
pull towards the centre of the oven.
3. Unhook the runner at the top and remove it
from the cavity.
4. To replace, hook the wirework back into the
oven sides.
Ensure that the wirework runners are
firmly in place before refitting the oven
shelves.
CLEANING THE
WIREWORK RUNNERS AND OVEN
FURNITURE
Soak the oven shelves, wirework runners and
grilling grid in hot soapy water if heavily soiled,
they will then clean more easily. If the shelves
are heavily soiled a soap impregnated steel
wool pad can be used.
The grill pan, meat tin and trivet can be cleaned
using a soap impregnated steel wool pad.
All items of grill and oven furniture are
dishwasher safe with the exception of the grill
pan handle.

CARE OF STAYCLEAN SURFACES

The top, sides and back panels of both ovens
are coated with a Stayclean finish. They should
not be cleaned manually. Aerosol cleaners
must not be used on Stayclean surfaces and
must not come into contact with elements or the
door seal, as this may cause damage.
During normal use the Stayclean coating will
become splashed with fats and food residues.
By running the oven without food, the Stayclean
surfaces burn off any soilage. Regular use of
the oven cleaning cycle will help to keep the
panels in good condition. See page 32.
SHELVES,
31