Philips AVENT SCF876 User Manual page 17

Defrosting
If you have used the special storage pots to freeze blended food, you can use the
appliance to gently defrost the frozen food.
Note
• Always put previously blended food in the storage pot to defrost.
• Make sure that the sealing ring is assembled around the jar lid before
defrosting, and that the flat side of the sealing ring is facing out.
1
Fill the water tank with water up to the MAX water level marking indicated on
the side of the water tank or the MAX water level indication in the water tank.
2
Follow steps 2 to 8 in the chapter "Reheating".
3
Turn the control knob and select 30 minutes
» The steaming light
defrosting.
4
When the defrosting cycle is finished, the appliance will beep and the
steaming light
5
Turn the control knob back to the off position (OFF) (Fig. q). Wait 2 minutes,
or until there is no more steam coming from the top of the appliance before
removing the jar.
6
Open the lid and use the hook on the spatula to take the storage pot out
(Fig. |).
7
There may still be some water remaining in the water tank after a defrosting
cycle. This is normal. Wait until the appliance cools down to room
temperature, then empty the water tank of all residual water. To empty or
clean the water tank, refer to chapter "Cleaning and descaling".
Note
• Only defrost the same batch of food once.
• After defrosting, we recommend running another reheating cycle to thoroughly
heat up the food.
will turn white to indicate that the appliance is
will turn off.
ENGLISH
(Fig. }).
19