Charging Via Usb - Philips HX9392/39 Manual

Charging via USB

Cleaning
Toothbrush handle
Brush head
35_021_1518_1_Booklet_Lux_A6_v1.indd 15
1 Remove the USB cord from the travel plug and
insert the USB plug into an USB port.
-
Only use Philips USB wall adapter and
USB cable provided.
Use Only UL Listed devices as an alternate method
of charging the toothbrush handle in the travel case
(i.e. UL Listed Computer, USB Hub). The charger
is not compatible with previous models of Philips
Sonicare.
Note: Do not clean the brush head, handle,
charging base or USB travel case in the
dishwasher. The glass is dishwasher safe.
1 Remove the brush head and rinse the metal
shaft area with warm water. Make sure you
remove any residual toothpaste.
Note: Do not push on the rubber seal on the
metal shaft with sharp objects, as this may
cause damage.
2 Wipe the entire surface of the handle with a
damp cloth.
Note: Do not use isopropyl rubbing alcohol,
vinegar or bleach to clean handle as this may
cause discoloration.
1 Rinse the brush head and bristles after each use.
2 Remove the brush head from the handle and
rinse the brush head connection with warm
water at least once a week.
English
15
03/05/16 08:05