Advertisement
Available languages
Available languages
refrigerator is properly filled. To do this, press the
water dispenser lever until the water runs from the
water outlet.
• Water line installation kits are available at
extra cost from your dealer.
We recommend using a water line
installation kit that contains copper
tubing and a ¼" compression nut.
• Use the new hose-sets supplied with the
appliance only. Do not re-use an old hose set.
Connecting to the water supply line
1. First, shut off the main water supply.
2. Locate the nearest cold water drinking line and
install the pipe clamp and shut off valve.
Cold water line
Pipe clamp
Shut off valve
3. Connect the water line installation kit to the
shut off valve.
Cold water line
Pipe clamp
Shut off valve
DA68-02952B-07.indb 16
Connecting the water supply line to
the refrigerator.
There are several items that you need to purchase
to complete this connection.
You may find these items sold as a kit at your local
hardware store.
• ¼" copper tubing
• ¼" compression nut
• Ferrule (2pc)
1. Connect the household water line to the
Water line installation kit
If you are using copper tubing, slip the
compression nut ( A ) (not supplied) and ferrule
(not supplied) on the copper tubing (not supplied)
as shown.
If you are using plastic tubing ( B ) , insert the
molded end (Bulb) of the plastic tubing ( B ) into
the compression fitting.
Do not use without the molded end (Bulb) of the
plastic tubing ( B ).
English - 16
Use Copper Tubing
Use Plastic Tubing
• ¼" plastic tubing
→ Molded end(Bulb)
(1pc)
• ¼" compression nut
(1pc)
Refrigerator
Compression
Nut (1/4")
(Assembled)
Ferrule
(Not supplied)
Copper tubing
Plastic tubing (B)
or
(Not supplied)
(Not supplied)
Household water supply line
assembled compression fitting.
CAUTION
Plastic Tubing
(Assembled)
Compression
Fitting
(Assembled)
Molded
end(Bulb)
Compression
nut (A) (1/4")
(Not supplied)
2018. 7. 9.
4:53
Advertisement
