Table of Contents
Advertisement
Outdoor Unit Installation
Step 3.1 Fixing the outdoor unit in
place
Model
✴✴09KP✴✴
✴✴12KC✴✴
✴✴18KC✴✴
✴✴12KP✴✴
✴✴18KP✴✴
✴✴24✴✴
1 Place the outdoor unit as directed on the top of the
unit to let the discharged air out properly.
2 Fix the outdoor unit in level to an appropriate support
using anchor bolts.
NOTE
• Secure the rubber legs to help prevent the generation
of noise and vibration.
• If the outdoor unit is exposed to strong winds, install
shield plates around the outdoor unit so that the fan
can operate correctly.
42
English
RC_DB68-06033A-01.indd 42
X
Rubber leg
(Unit : mm)
X
Y
453
254
507
292
538
290
543
319
660
340
Optional: Fixing the outdoor unit to a wall with
a rack
Soft rubber designed to cut off vibration from
rack to wall (not supplied with product)
Soft rubber designed to cut off residual vibration from
outdoor unit to rack (not supplied with product)
NOTE
• Make sure that the wall can support the weights of
the rack and the outdoor unit.
• Install the rack close to the column as much as
possible.
Step 3.2 Connecting the cables and
the refrigerant pipes
AR✴✴KC✴✴
N(1)
1
CAUTION
• Be sure to fix the power cables and communication
cable with a cable clamp.
AR✴✴KP✴✴
N(1)
1
2
3
5/27/2016 5:16:28 PM
Advertisement
Table of Contents
