Table of Contents
Advertisement
Cleaning at a Glance
Running Auto clean
NOTE
• When you set the Auto clean timer, Clean blinks and then disappears on the remote control
display. The Timer (
• When the air conditioner is off, Auto clean starts immediately when it is selected. When the
air conditioner is on, Auto clean starts as soon as the air conditioner stops running.
• During Auto clean, the indoor fan continues to run, and air flow blades remain open to expel
ambient air.
Cleaning the indoor unit exterior and outdoor unit heat exterior
Before cleaning, be sure to turn off the equipment
and disconnect the power plug.
CAUTION
• Do not clean the display by using alkaline detergent.
• Do not use sulphuric acid, hydrochloric acid, or organic solvents (such as thinner, kerosene,
and acetone) to clean the surfaces. Do not put any stickers on it as this can damage the
surface of the air conditioner.
RC_DB68-06033A-01.indd 25
) indicator also appears on the indoor unit display.
Tepid damp cloth
Soft brush
Cleaning duration
(minutes)
Auto (Cool),
30
Cool, Dry
Auto (Heat),
15
Heat, Fan
Spray water to clean the dust.
25
English
5/27/2016 5:15:54 PM
Advertisement
Table of Contents
