Pci-Express Card - Lenovo IdeaCentre 5 User Manual

6. Install the heat sink and secure it with screws.
7. Reinstall all removed parts.
8. Place the computer in an upright position. Then, reconnect the power cord and all disconnected cables
to the computer.
Note: If a locking device is available, use it to lock the computer.

PCI-Express card

Prerequisite
Before you start, read Appendix A "Important safety information" on page 49 and print the following
instructions.
Replacement procedure
1. Turn off the computer and remove all connected devices and cables.
2. Remove the computer cover. See "Computer cover" on page 25.
3. Remove the front bezel. See "Front bezel" on page 26.
4. Remove the storage drive bracket. See "Storage drive bracket" on page 30.
5. Pivot the card retaining latch and the card latch to remove the PCI-Express card.
40
User Guide