Lenovo IdeaCentre 5 User Manual page 39

1. Turn off the computer and remove all connected devices and cables.
2. Remove the computer cover. See "Computer cover" on page 25.
3. Remove the front bezel. See "Front bezel" on page 26.
4. Remove the screw from M.2 solid-state drive.
5. Slide the M.2 solid-state drive out.
6. Install the M.2 solid-state drive in.
7. Secure the M.2 solid-state drive with the screw.
8. Reinstall all removed parts.
9. Place the computer in an upright position. Then, reconnect the power cord and all disconnected cables
to the computer.
Note: If a locking device is available, use it to lock the computer.
.
Chapter 5 CRU replacement
33