Program Radio Stations Manually; Tune To A Preset Radio Station; Adjust Sound; Adjust Volume Level - Philips DCD3020/58 User Manual

Program radio stations
manually
Note
•
You can program a maximum of 20 preset radio
stations.
1
Tune to a radio station.
2
Press ANGLE/PROG to activate
programming.
3
Press / to allocate a number from 1
to 20 to this radio station, and then press
ANGLE/PROG to confirm.
» The preset number and the frequency
of the preset station are displayed.
4
Repeat the previous steps to program
more stations.
Note
•
To overwrite a programmed station, store another
station in its place.

Tune to a preset radio station

In the tuner mode, press
preset number.
• You can also press the numeric buttons to
select a preset number directly.
EN
20
/ to select a

8 Adjust sound

Adjust volume level

During play, press VOL +/- to increase/decrease
the volume level.

Select a sound effect

Note
•
You cannot use different sound effects at the same
time.
Select a preset sound effect
During play, press DSC repeatedly to select:
• [CLASSIC] (classic)
• [JAZZ] (jazz)
• [POP] (pop)
• [ROCK] (rock)
Enhance bass
The best Dynamic Bass Boost (DBB) setting is
generated automatically for each DSC option.
You can manually select the DBB setting that
best suits your listening environment.
During play, press DBB repeatedly to turn on/
off the DBB feature.
• [DBB]: The DBB feature is enabled.

Mute sound

During play, press to mute or restore sound.