Advertisement
2. Mounting the zoom lens
Be sure to disconnect the power cable before installa-
tion, because there is danger of electrical shock.
Memo
Note that the illustrations below may not match your par-
ticular projector model.
2-1 Removing the current lens
(1) Remove the front case.
1. Remove the three mounting screws, and pull off the front case.
The two components will separate from each other.
Warning
Always mount and dismount the lens in a
clean room, to minimize the amount of dust.
Excessive dust inside the lens could cause
damage.
Screws (three)
Front case
11
Advertisement
