Advertisement
1. Before mounting the zoom lens
1-1 Safety precautions
Be sure to screw the Long-Focal Length lens and
adapter ring down completely. Unless they are securely
screwed on, they could fall off and cause damage or
injury (especially when the projector is ceiling-mounted).
1-2 Check product contents
Make sure that you have all the parts, as shown below, before starting.
Rear lens cap
User's manual (this document)
In addition to the included screwdriver, you will also need a Phillips
screwdriver, and various other common tools.
Memo
10
Warning
Be sure to use a Phillips screwdriver that fits
the screws properly.
Zoom lens
Front lens cap
Used to tighter/remove
mounting screws
Screwdriver
Advertisement
