Overview of the remote
control
a VOL +/-
• Adjust volume.
/
b
• Select tuner band.
• Scroll up/down menu.
• Select MP3/WMA folder.
/
c
• Tune to a radio station
• Skip track.
• Fast backward/forward playback
d SOURCE
• Select audio source.
e EQ
• Select equalizer (EQ) settings.
f OFF /
/
• Turn the unit on or off.
• Mute or restore volume.
3 Get started
Caution
a
•
Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in
b
sequence.
c
If you contact Philips, you will be asked for the
model and serial number of your apparatus. The
model number and serial number are on the
d
bottom of your apparatus. Write the numbers
here:
e
Model No. __________________________
Serial No. ___________________________
f
Install the car audio
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
Caution
•
This unit is designed for negative ground (earth) 12 V
DC operation only.
•
Always install this unit in the car dashboard. Other
locations can be dangerous as the rear of the unit heats
up during use.
•
To avoid short-circuit: before you connect, ensure that
the ignition is off.
•
Ensure that you connect the yellow and red power
supply leads after all other leads are connected.
•
Ensure that all loose leads are insulated with electrical
tape.
•
Ensure that the leads do not get caught under screws
orin parts that will move (e.g. seat rail).
•
Ensure that all ground (earth) leads are run to a
common ground (earth) point.
•
Use only the supplied mounting hardware for a safe
and secure installation.
•
Improper fuses can cause damage or fire. When you
need to change the fuse, consult a professional.
EN
7