Page 1
Register your product and get support at CEM3000 Installation guide...
Page 4
If you have standard connector to the unit. any questions regarding installation kits, consult Connect the antenna and amplifier as your Philips car audio dealer. illustrated, if applicable. You can connect the car audio to the amplifier through RCA-TO- Caution RCA cables (not supplied).
Check the car’s wiring carefully and connect Note them to the supplied standard connector. If the unit is not fixed by sleeve but by the • Green/black strip Left speaker (Rear) supplied screws, skip this step. White/black strip Left speaker (Front) Place the supplied rubber cushion over the Gray/black strip Right speaker (Front)