Basic Features
Aerial
→
→
Menu
Broadcasting
Aerial
Before your product can memorised the available channels, you must select your Product signal source,
(using an aerial) or Cable. Select
function.
✎
Selecting the signal source using the
example, if you receive your product signal over the aerial, and you select Cable, you will see only snow. You must
select
Terrestrial
to see a picture.
Auto Tuning
Menu
→
Broadcasting
→
Auto Tuning
Automatically scans and indexes all channels received through the TV's aerial input connector.
To start, navigate to
Broadcasting
Select
Start
when prompted with a message. This initiates the
minutes to complete. If Starting the
previous index.
Auto Tuning
•
Scans for channels automatically and stores them in the TV's memory.
•
Cable Search Option
(when the aerial was set to Cable) (Depending on the country)
Sets additional search options such as the frequency and symbol rate for a cable network search.
Country (Area)
→
→
Menu
Broadcasting
Channel Settings
Select your country so that the product can correctly auto-tune the broadcasting channels.
✎
The PIN input screen appears. Enter your 4 digit PIN number.
•
Digital
Channel: Change the country for digital channels.
Analogue
Channel: Change the country for analogue channels.
•
Memorising Channels
Terrestrial
or Cable. After you have selected the signal source, go on to the
Aerial
function also determines the signal source the product is tuned to. For
and select
Auto
Tuning.
Auto Tuning
function when there is an existing index of channels overwrites the
→
Country (Area)
English - 39
Auto Tuning
function. The process can take up to 30
Terrestrial
Auto Tuning