Table of Contents
Advertisement
Basic Features
Aerial
→
→
Menu
Broadcasting
Aerial
Before your product can memorise the available channels, you must select your Product signal source,
aerial) or Cable. Select
Air
or Cable. After you have selected the signal source, go on to the
✎
Selecting the signal source using the
example, if you receive your product signal over the air, and you select Cable, you will see only snow. You must
select
Air
to see a picture.
Auto Tuning
Menu
→
Broadcasting
→
Auto Tuning
Automatically scans and indexes all channels received through the TV's aerial input connector.
To start, navigate to
Broadcasting
Select
Start
when prompted with a message. This initiates the Auto Tuning function. The process can take up to 30
minutes to complete. If Starting the Auto Tuning function when there is an existing index of channels overwrites the
previous index.
Auto Tuning
•
Scans for channels automatically and stores them in the TV's memory.
•
Cable Search Option
(when the aerial was set to Cable) (Depending on the country)
Sets additional search options such as the frequency and symbol rate for a cable network search.
Country (Area)
→
→
Menu
Broadcasting
Channel Settings
Select your country so that the product can correctly auto-tune the broadcasting channels.
✎
The PIN input screen appears. Enter your 4 digit PIN number.
•
Digital
Channel: Change the country for digital channels.
•
Analogue
Channel: Change the country for analogue channels.
Memorising Channels
Aerial
function also determines the signal source the product is tuned to. For
and select
Auto
Tuning.
→
Country (Area)
English - 38
Air
(using an
Auto Tuning
function.
Advertisement
Table of Contents
