Chapter 4. Home screen
2
The
No cloning file found on the external storage device. Export this device's
settings to the external storage device?
3
Select
Export
to export the settings.
When a duplicate file is found on the external storage device
1
Connect the external storage device, then run the
2
The
Cloning file found. Please select an option.
3
Select
Clone from External Storage Device
‒
C lone from External Storage
Device: Copy settings saved on an external storage
device to the product.
‒
C lone to External Storage
Device: Copy settings on the product to an external
storage device.
After configuration is complete, the product is rebooted automatically.
message appears.
Clone Product
function.
message appears.
or
Clone to External Storage
Device.
ID Settings
→
ID Settings
→
HOME
Assign an ID to a set.
Device ID
Enter the ID number of the product connected to the input cable for input signal
reception. (Range: 0~224)
• Press ▲/▼ to select a number, and press
• Enter the number you want using the number buttons on the remote control.
Device ID Auto Set
This feature automatically allots an ID number to a device connected via an RS232C
cable.
When multiple devices are connected, enable the feature on either the first or last
device.
PC Connection Cable
Select a method to connect to MDC to receive the MDC signal.
•
R S232C cable
Communicate with MDC via the RS232C-stereo cable.
•
R J-45 (LAN)/Wi-Fi Network
Communicate with MDC via the RJ45 cable or Wi-Fi network.
48
.