Table of Contents
Advertisement
Unzip the download if zipped, and
a
make sure that the unzipped file
contains the following two files.
"CSS5235.bin" (for the software of
the main unit)
"MCU5235.bin" (for the software
of the surround speakers)
Put the "CSS5235.bin" and
b
"MCU5235.bin" in the root
directory of the USB device.
3
Connect the USB storage device to
the
connector on this product.
4
Switch this product to the HDMI ARC
source, and switch your TV to the
HDMI source.
5
On the remote control, within 6
seconds press
once, then hold down MOVIE until
upgrade information appears on the
TV screen.
» If an upgrade media is detected, on
the TV screen you are prompted
to start the update.
» If an upgrade media is not
detected, an error message is
displayed on the TV screen. Make
sure that the latest software of this
product is put in the USB storage
device.
6
Press
to start the update.
7
Wait until the update is completed.
» If the update is complete, this
product automatically turns off and
on again.
16 EN
twice, and Volume +
Caution
Do not turn off the power or remove
•
the USB storage device when the
software update is in progress because
you might damage this player.
Advertisement
Table of Contents
