4 Use your
product
This section helps you use this product to
play audio from connected devices.
Before you start
Make the necessary connections
•
described in the quick start guide and
the user manual.
Switch this product to the correct
•
source for other devices.
Adjust the volume
1
Press Volume +/- to increase or
decrease a volume level.
To mute sound, press
•
To restore the sound, press
•
again or press Volume +/-.
» If volume is set to the maximum
or minimum, the white LED on the
right base speaker blinks two times.
Choose your sound
This section helps you choose the ideal
sound for your video or music.
Sound mode
Select predefined sound modes to suit
your video or music.
Press MOVIE to create a surround
•
listening experience. Ideal for watching
movie.
Press MUSIC to create stereo sound.
•
Ideal for listening to music.
12 EN
.
Press VOICE to create sound effect
•
which makes human voice more clear
and outstanding for listening.
Equalizer
Change the high frequency (treble) and
low frequency (bass) settings of this
product.
1
Press TREBLE +/- or BASS +/- to
change the frequency.
» If the treble or bass is set to the
maximum or minimum, the white
LED on the right base speaker blinks
two times.
Synchronize video and sound
If the audio and video are not
synchronized, delay the audio to match the
video.
1
Press AUDIO SYNC +/- to
synchronize the audio with the video.
AUDIO SYNC + increases the
•
sound delay, and AUDIO SYNC -
decreases the sound delay.
» If the value of sound delay is set
to the maximum or minimum,
the white LED on the right base
speaker blinks two times.
Night mode
For quiet listening, night mode decreases
the volume of loud sounds when audio
is played. Night mode is only available for
Dolby Digital soundtracks.
1
Press NIGHT ON/OFF to turn night
mode on or off.