Table of Contents
Advertisement
Standby power management
When the product remains inactive for
•
15 minutes, it automatically switches to
standby or networked standby.
The power consumption in standby or
•
networked standby is less than 0.5W.
To deactivate Bluetooth connection,
•
press and hold the Bluetooth button
on the remote control.
To activate Bluetooth connection,
•
enable Bluetooth connection on your
Bluetooth device, or enable Bluetooth
connection via the NFC tag (if
available).
18 EN
7 Troubleshooting
Warning
Risk of electric shock. Never remove
•
the casing of the product.
To keep the warranty valid, never try to
repair the product yourself.
If you have problems using this product,
check the following points before you
request service. If you still have a problem,
get support at www.philips.com/support.
Main unit
The buttons on this product do not work.
Disconnect this product from the
•
power supply for a few minutes, then
reconnect.
Sound
No sound from the speakers of this
product.
Connect the audio cable from this
•
product to your TV or other devices.
However, you do not need a separate
audio connection when this product
and TV are connected through HDMI
ARC connection.
Reset this product to its factory
•
settings.
On the remote control, select the
•
correct audio input.
Make sure that this product is not
•
muted.
No sound from the wireless surround
speakers.
Wirelessly connect the speakers to the
•
main unit.
Advertisement
Table of Contents
