Maintenance; Troubleshooting - Philips DCM276 User Manual

Micro hi-fi system
Hide thumbs Also See for DCM276:
Table of Contents



Clean the cabinet
Use a soft cloth slightly moistened with
a mild detergent solution. Do not use
a solution containing alcohol, spirits,
ammonia or abrasives.
Clean discs
When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
Clean the disc lens
After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure
good play quality, clean the disc lens
with Philips CD lens cleaner or any
commercially available cleaner. Follow the
instructions supplied with cleaner.
Downloaded From Philips Manuals

10 Troubleshooting

Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
No power
Ensure that the AC power plug of the
unit is connected properly.
Ensure that there is power at the AC
To save power, the unit switches to
standby automatically 15 minutes after
a play reaches the end and no control is
No sound
Adjust the volume.
No response from the unit
Disconnect and reconnect the AC power
plug, then turn on the unit again.
No disc detected
Insert a disc.
Check if the disc is inserted with the print
side facing inward.
Wait until the moisture condensation at
the lens has cleared.
Replace or clean the disc.


Table of Contents

Subscribe to Our Youtube Channel

Table of Contents