Monthly Cleaning Of The Milk Carafe - Philips Saeco INCANTO HD8918 User Manual

2 Turn the milk dispensing unit upside down and hold it firmly in your hand.
3 Press the release buttons on the milk frother and remove the milk frother
1
2
4 Pull the milk frother connector out of the milk frother.
5 Rinse all components under a lukewarm tap.
Reassembling the milk carafe
1 To reassemble the milk froth dispensing spout, follow steps 2 to 4 of
2 Place the milk froth dispensing spout back into the top of the milk carafe.
3 Place the top of the milk carafe back onto the milk carafe.
Note: Before you place the milk froth dispensing spout back into the top of
the milk carafe, move the pin inside the top to the correct position. If this pin
is not in the correct position, you cannot place the milk froth dispensing
spout back into the top of the milk carafe.

Monthly cleaning of the milk carafe

Only use SAECO milk circuit cleaner CA6705 for this cleaning cycle.
1 Pour the contents of the milk circuit cleaner sachet in the milk carafe.
2 Insert the milk carafe into the machine and place a container under the
3 Press the MENU button, select DRINKS and scroll to MILK FROTH. Press
4 Repeat step 3 until the milk carafe is empty.
5 When the carafe is empty, remove the container and the milk carafe from
6 Rinse the milk carafe thoroughly and fill it with fresh water up to the MAX
7 Insert the milk carafe into the machine.
8 Place the container under the milk dispensing spout.
Pull the milk tube off the rubber support.
from the the rubber support.
'Disassembling the milk froth dispensing spout' in reverse order.
Then fill the milk carafe with water up to the MAX level indication.
milk dispensing spout.
the OK button to start dispensing the cleaning solution.
the machine.
level indication.
English
19