Installing And Removing Ops Module (Cdp4260-Tl/Cdp5560-Tl Series) (Optional); Mounting On A Wall - ViewSonic CDP4260-TL User Manual

1.5.

Installing and Removing OPS module (CDP4260-TL/CDP5560-TL series) (optional)

To install OPS Module:
1. Power off the display.
2. Remove the cover of OPS after take screw off.
3.
NOTE: Keep the OPS cover for future use.
To remove OPS Module:
1. Power off the display.
2. Remove screw and plug out OPS module.
3.
1.6.

Mounting on a Wall

To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available).
We recommend using a mounting interface that complies with TUV-GS and/or UL1678 standard in North
America.
VESA Grid
Table
OPS
Protective Sheet
For Tabletop stand
3
Screw
Screw