Preparation - Panasonic ES-LV5B Operating Instructions Manual

8 Appliance socket
9 Outer foil section
: System outer foil release
buttons
; Inner blades
< Trimmer
= Trimmer handle

Preparation

Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug into
the shaver.
2
Plug the adaptor into a
household outlet.
• Check that the charge status lamp
( ) is glowing.
• Charging is completed after approx.
1 hour.
3
Disconnect the adaptor after charging is
completed.
B AC adaptor (RE7-87)
> Adaptor
? Power plug
@ Cord
A Appliance plug
Accessories
C Travel pouch
D Cleaning brush
E Oil
2
1
While charging
glows.
The number of the battery
capacity lamp will increase as
charging progresses.
Notes
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charging time may
change or the charge status lamp (
minutes. It will eventually glow if kept connected.
• Recommended ambient temperature for charging is 10 – 35 °C.
It may take longer to charge, or the charge status lamp (
blink quickly and the battery may fail to charge properly in
extremely high or low temperatures.
• The shaver can be used for approximately 2 weeks with a full
charge.
(Based on one 3‑minute shave use per day)
The number of usable days varies depending on the following
conditions.
- Beard thickness
- Pressure applied to the skin
- Ambient temperature
- Usage frequency of the sonic vibration cleaning mode
• If there is noise from radio or other source while using the
shaver, move to a different location to use the shaver.
After charging is completed
The battery capacity lamp and
will light up and then turn
off after 5 seconds.
) may not glow for a few
) will
9