Table of Contents
Advertisement
Next, enter the head right to left adjustment value.
6
# P R I N T H E A D A D J U S T
# R / L A D J M 7 > + 0 0
7
# P R I N T H E A D A D J U S T
# R / L A D J M 7 [ + 0 0
Input the value of the test pattern where each print head's
two lines overlap with the least misalignment.
For example, on the right test patterns for M7 print head,
the two lines misalign at -21 while they overlap to be one
line at +2. So input +2 for the correction value.
8
# P R I N T H E A D A D J U S T
# R / L A D J M 7 [ + 0 2
9
# P R I N T H E A D A D J U S T
# R / L A D J M 7 > + 0 2
98
IP-7900-20/21/7700-20/21 Advanced Operation Guide
Select the print head to adjust with the
Here, the M7 print head is adjusted as an example.
Select the digit with the
the value with the
or
-21
+2
M
M
Press the
key.
Adjust values for the other print heads with the
same procedure.
key.
or
key, and set
key.
Advertisement
Table of Contents
