Yamaha PSR-S975 Reference Manual page 71

2 DELETE
You can delete the data of the specified channel in the Song. Select the channel whose data to be deleted
by using the [1 ]–[8 ] buttons, then press the [D] (EXECUTE) button to carry out the operation.
3 MIX
This function lets you mix the data of two channels and place the results in a different channel. It also lets
you copy the data from one channel to another.
[2 ]/
SOURCE 1
[3 ]
[4 ]/
SOURCE 2
[5 ]
[6 ]/
DESTINATION
[7 ]
4 CHANNEL TRANSPOSE
This allows you to transpose the recorded data of individual channels up or down by a maximum of two
octaves in semitone increments.
Make sure not to transpose channels 9 and 10. In general, Drum Kits are assigned to these channels. If you transpose the channels of Drum Kits, the
instruments assigned to each key will be changed.
[F] CH 1–8/CH 9–16 Toggles between the two channel displays: Channels 1–8, and Channels
[G] ALL CH
Determines the MIDI channel (1–16) to be mixed. All MIDI events of the
channel specified here are copied to the destination channel.
Determines the MIDI channel (1–16) to be mixed. Only note events of the
channel specified here are copied to the destination channel. Besides the
values 1–16, there is a "COPY" setting that allows you to copy the data
from Source 1 to the destination channel.
Determines the channel into which the mix or copy results will be placed.
9–16.
To simultaneously set all channels to the same value, adjust the Channel
Transpose for one of the channels while holding down this button.
PSR-S975/S775 Reference Manual
3
71