Table of Contents
Advertisement
WARNING
Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
third-party overclocking tools. Overclocking may affect your system's stability, or
even cause damage to the components and devices of your system. It should be
done at your own risk and expense. We are not responsible for possible damage
caused by overclocking.
CAUTION!
1.
About the settings of "Hyper Threading Technology", please check page
30.
2.
Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
32-bit.
3.
You can choose to use two of the three monitors only. D-Sub, LVDS and
HDMI monitors cannot be enabled at the same time.
4.
While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the moth-
erboard functions properly and unplug the power cord, then plug it back
again. To improve heat dissipation, remember to spray thermal grease
between the CPU and the heatsink when you install the PC system.
8
®
7
Advertisement
Table of Contents
