Preparation Using Coffee Beans; Preparation Using Ground Coffee; Dispensing Hot Water - Siemens TE501505DE/10 Instruction Manual

■ With the grinding unit running, adjust the
selector (3) from fine (a: turn anticlock­
wise) to coarse (b: turn clockwise).
a
Information: The effects of the new grind
setting will not become apparent until after
the second cup of coffee.
Tip: Choose a finer grind for dark roasted
beans and a coarser grind for lighter beans.
Preparation using
coffee beans
This fully automatic espresso machine
grinds beans freshly for each brew.
Tip: For optimum quality, store the beans in
a cool place in sealed containers.
Important: Fill the water tank with fresh,
uncarbonated, cold water every day. The
water tank (16) should always contain suffi­
cient water for operating the appliance.
Different coffee drinks can be prepared
quite simply at the press of a button.
Preparation
The appliance must be ready for use.
1. Place the pre­warmed cup(s) under the
coffee outlet (7).
Tip: For a small espresso, always
preheat the cup, e.g. using hot water.
2. Select the required coffee and the
required quantity by turning the upper
rotary knob (14).
3. Select the required coffee strength by
turning the lower rotary knob (13).
4. Press the start button (10).
b

Preparation using coffee beans

Coffee is brewed and then poured into the
cup(s).
Press the start button (10) again to stop the
brewing process early.
Preparation using
ground coffee
This fully automatic espresso machine can
also be operated using ground coffee (not
instant coffee powder).
Important: Fill the water tank with fresh,
uncarbonated, cold water every day. The
water tank (16) should always contain suffi­
cient water for operating the appliance.
Preparation
1. Open the drawer (4).
2. Put ground coffee into the drawer
(maximum two level measuring spoons).
Caution: Do not use whole beans or
instant coffee.
3. Close the drawer (4).
4. Turn the rotary knob (13) to position
5. Turn the rotary knob (13) to the
G
symbol .
6. Press the start button (10).
Coffee is brewed and then poured into the
cup.

Dispensing hot water

W Risk of burns!
The milk frother (6) gets very hot. Hold the
milk frother (6) by the plastic part only.
The milk frother must be cleaned before
drawing hot water.
The appliance must be ready for use.
1. Place a pre­heated cup or glass under
the milk frother outlet (6).
2. Pull out the milk frother (6) to open it.
The appliance heats up. Hot water runs
out of the milk frother outlet (6) for about
40 seconds.
3. Stop the process by pushing in the milk
frother (6).
en
c
.
27