Settings - Atag VA63315VT User Manual

8
1)
Programme
P2
Auto 45°-70°
P3
Intensive 70°
P5
Glass 45°
P4
Quick 60°
P7
Rinse Hold
P6
Silent 50°
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity
of dishes can change the values.
Information for test institutes
For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com

SETTINGS

Programme selection mode and
user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
• The level of water softener according to
the water hardness.
• Activation or deactivation of the
acoustic signal for the end of a
programme.
• Selection of the colour of the
TimeBeam.
• Activation or deactivation of the rinse
aid empty notification.
• The level of rinse aid according to the
required dosage.
• Activation or deactivation of AirDry.
Water
(l)
7 - 15
12.5 - 14.5
12 - 14
10
4
9 - 10
Write down the product number (PNC)
that is on the rating plate.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the display shows the
programme number P1.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold RESET until the appliance
is in programme selection mode.
Energy
(kWh)
0.6 - 1.7
1.4 - 1.7
0.7 - 0.9
0.9
0.1
1.1 - 1.3
Duration
(min)
40 - 170
170 - 190
82 - 92
30
14
230 - 250