Acer AL1916 Service Manual page 20

This monitor meets the Green monitor standards as set by the Video Electronics Standards Association(VESA) and/or the
United States Environmental Protection Agency (EPA) and The Swedish Confederation Employees (NUTEK). This feature
is designed to conserve electrical energy by reducing power consumption when there is no video-input signal present. When
there is no video input signal this monitor, following a time-out period, will automatically switch to an OFF mode. This
reduces the monitor' s internal power supply consumption. After the video input signal is restored, full power is restored and
the display is automatically redrawn. The appearance is similar to a "Screen Saver" feature except the display is completely
off. The display is restored by pressing a key on the keyboard, or clicking the mouse.
USING THE RIGHT POWER CORD
The accessory power cord for the Northern American region is the wallet plug with NEMA 5-15 style and is UL listed and
CSA labeled. The voltage rating for the power cord shall be 125 volt AC.
Supplied with units intended for connection to power outlet of personal computer: Please use a cord set consisting of a
minimum No. 18 AWG, type SJT or SVT three conductors flexible cord. One end terminates with a grounding type
attachment plug, rated 10A, 250V,CEE-22 male configuration. The other end terminates with a molded-on type connector
body, rated 10A, 250V, having standard CEE-22 female configuration.
Please note that power supply card needs to use VDE 0602, 0625, 0821 approval power cord in European counties.
- 20 -