Acer AL1916 Service Manual page 25

1.[FASTEN 1*PCS SCREW(M3.5*8-B)
IN THE APPOINTED PLACE OF
POWER/B]
2.[GET POWER/B MYLAR,TEAR OFF
BACK TYPE AND STICK ON THE
APPOINTED PLACE]
3.[GET BUTTON CABLE THROUGH
THE APPOINTED HOLE]
1. [MOVE PCB SHIELD TOTHE
FRONT OF CONVEYER]
2 [GET PANEL AND PUT IT ON THE
CONVEYER, THEN TEAR OFF THE
INCOMING TAPE]
- 25 -