iRobot R11384 Manual page 5

• Do not put objects into the suction intake.
Do not use if the suction intake is blocked.
Keep the intake clear of dust, lint, hair, or
anything that may reduce air flow.
NOTICE
EN
• The battery must be removed and
discarded according to local laws and
regulations before recycling or disposal of
the Appliance.
• Do not use non-rechargeable batteries.
Use only the rechargeable battery supplied
with the product. For replacement,
purchase identical iRobot battery or
contact iRobot Customer Care for
alternative battery options.
• If the robot will not be used for a long time,
fully charge the robot and power OFF for
storage and unplug the charging station.
• When not using the charging station for a
long period of time, please unplug it.
• Do not use without dust bin and/or filters in
place.
• To satisfy RF exposure requirements, a
separation distance of 20 cm (7.9 in) or
greater should be maintained between
this device and any persons during
device operation. To ensure compliance,
operation at any distance closer than the
stated minimum is not recommended. The
antenna used for this transmitter must not
be co-located or operated in conjunction
with any other antenna or transmitter.
• To disable the Wi-Fi module on Roomba
Combo, turn the robot's power ON. Place
the robot on the charging station, making
sure that the charging contacts on the
robot and the charging contacts on the
charging station make a connection.
Press and hold the CLEAN button on
the robot for 20 seconds, until Roomba
Combo emits 3 beeps. To enable the Wi-
Fi module on Roomba Combo, turn the
robot's power OFF, and then back ON.
The Wi-Fi module will be enabled when
Roomba Combo is restarted.