Table of Contents
Advertisement
6 Brightness: Adjust the brightness from 0 to 100.
Note: Adjusts the balance between light and dark shades.
7 Contrast: Adjust the contrast from 0 to 100.
Note: Sets the degree of difference between light and dark areas.
8. H.Position: adjust the horizontal position of the picture.
9. V.Position: adjust the vertical position of the picture.
10. Focus: adjust clk phase to ADC.
11. Clock: adjust ADC Clock Fast Lock.
12. Color Temp is for user to adjust the colour temperature from blue light, warm, cool
and user. The default value is warm.
13. 6-axis Saturate: Adjust saturation of red, green, blue, yellow, magenta and cyan.
6-axis Hue: Adjust hue for red, green, blue, yellow, magenta and cyan.
14. Auto Config: Press this button to activate the Auto Adjustment function. The Auto
adjustment function is used to set the HPos, VPos, Clock and Focus. (Only available on
VGA port.)
OSD Menu
The OSD menu is used for adjusting the OSD menu location and the timeout setting.
1 Press the Menu button to bring up the OSD menu.
<
>
2 Press the
/
OSD menu.
<
3 Press the
/
10 seconds.
12
OSD
OSD Timeout
button to select
>
button to adjust the OSD Timeout (10 ~ 120 seconds), the default is
OSD and press the Menu button to enter the
10
Advertisement
Table of Contents
