Specifications - Makita NLADML810 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
LED
Rated voltage
Luminous flux
Operating time
(with BL1860B x2, all LEDs light up)
Maximum number of interconnectable appliances
Operating temperature
Storage temperature
Dimensions
(L x W x H)
Net weight
(without battery cartridge and power cord)
Protection degree
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Operating times are approximate and may differ depending on battery type, charging status, and usage condition.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The followings show the symbols which may be used for the equip-
ment. Be sure that you understand their meaning before use.
Read instruction manual.
Only for EU countries
Ni-MH
Due to the presence of hazardous components in the
Li-ion
equipment, waste electrical and electronic equip-
ment, accumulators and batteries may have a nega-
tive impact on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household waste!
In accordance with the European Directive on
waste electrical and electronic equipment and on
accumulators and batteries and waste accumu-
lators and batteries, as well as their adaptation to
national law, waste electrical equipment, batteries
and accumulators should be stored separately
and delivered to a separate collection point for
municipal waste, operating in accordance with the
regulations on environmental protection.
This is indicated by the symbol of the crossed-
out wheeled bin placed on the equipment.
D.C.14.4 V Model
D.C.18 V Model
5 ENGLISH
0.2 W x 202
A.C. 100V - 240V, 50/60Hz
D.C. 14.4V / 18V
5,500lm / 3,000lm / 1,500lm
4 hours (5,500lm) / 18 hours (1,500lm)
0 °C ~ 40 °C
-20 °C ~ 60 °C
420 mm x 420 mm x 787 mm
DC: IP54 (only powered by battery pack)
AC: IP20
BL1415N / BL1430B / BL1460B
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
Take particular care and attention.
Optical Radiation (UV and IR).
Minimize exposure to eyes or skin.
Do not stare at operating lamp.
Use appropriate shielding or eyes
protection.
Do not use the appliance in the rain or
snow when using with AC power.
Breaker restart button.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. This tool
should be grounded while in use to protect the operator
from electric shock. Use only three-wire extension cords
which have three-prong grounding-type plugs and three-
pole receptacles which accept the tool's plug.
DML810
8
13.9kg