Specifications; Important Safety Instructions - Makita DML805 Instruction Manual

ENGLISH
(Original instructions)

SPECIFICATIONS

Model
LED
Operating time*
(with Battery BL1830)
Power source
Standard battery cartridge
Voltage (with battery operation)
Dimensions (L x W x H)
Net weight
Pressure receiving area (Lens area)
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
* This value is only advisory. This may vary according to the condition and environment of the battery.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
• Read instruction manual.
• Indoor use only
• Only for EU countries
Cd
Ni-MH Do not dispose of electric equipment or
Li-ion
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic Equipment
and Batteries and Accumulators and Waste
Batteries and Accumulators and their
implementation in accordance with national
laws, electric equipment and batteries and
battery pack(s) that have reached the end
of their life must be collected separately and
returned to an environmentally compatible
recycling facility.
• DOUBLE INSULATION
• Optical Radiation (UV and IR).
Minimize exposure to eyes or skin.
• Do not stare at operating lamp.
• Use appropriate shielding or eyes
protection.
• Take particular care and attention!
2
(Approximately) High: 5 hours / Low: 10 hours
BL1430/BL1440/
BL1415/BL1415N
BL1450
14.4 V
8-3/8" x 10-1/4" x 12-7/8" (214 mm x 261 mm x 328 mm)
5.1 lbs (2.3 kg) 5.5 lbs (2.5 kg)
IMPORTANT SAFETY
INSTRUCTIONS
WARNING: When using electric tools, basic safety
precautions should always be followed to reduce the risk
of fire, electric shock, and personal injury, including the
following:
READ ALL INSTRUCTIONS.
CAUTION:
1. When the tool is not in use, always switch off, and
unplug / remove the battery cartridge from the tool.
2. Do not cover or clog the lit tool with cloth or carton,
etc. Covering or clogging it may cause a flame.
3. Do not use the tool in damp or wet locations. Do not
expose the tool to rain or snow. Do not wash it in
water.
4. Do not use the tool in explosive atmospheres, such
as in the presence of flammable liquids, gases or
dust.
5. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric
shock.
6. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
DML805
20 pcs, 10 W
100-240 V 50-60 Hz AC
or 14.4 V / 18 V DC
BL1815/BL1815N/
BL1820/BL1820B
5.2 lbs (2.4 kg)
0.0195 m
2
BL1830/BL1830B/
BL1840/BL1840B/
BL1850/BL1850B/
BL1860B
18 V
5.8 lbs (2.6 kg)