Page 1
INSTRUCTION MANUAL MANUEL D'INSTRUCTION MANUAL DE INSTRUCCIONES Cordless Area Worklight Lampe de Zone Chantier Luz Inalámbrica para Área de Trabajo DML810 IMPORTANT: Read Before Using. IMPORTANT : Lire avant usage. IMPORTANTE: Lea antes de usar.
ENGLISH (Original instructions) SPECIFICATIONS Model: DML810 0.2 W x 202 Rated voltage A.C. 100V - 240V, 50/60Hz D.C. 14.4V / 18V Luminous flux 5,500lm / 3,000lm / 1,500lm Operating time 4 hours (5,500lm) / 18 hours (1,500lm) (with BL1860B x2, all LEDs light up)
Page 3
Do not expose the appliance to rain or snow. 20. Do not contact hot parts. Never wash it in water. 21. Unplug from outlet when not in use and before Do not use the appliance in explosive atmo- servicing or cleaning. spheres, such as in the presence of flammable 22.
Page 4
GROUNDING INSTRUCTIONS Follow all charging instructions and do not charge the battery pack or tool outside the This product must be grounded. In the event of mal- temperature range specified in the instruc- function or breakdown, grounding provides a path tions.
Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting CAN ICES-005(B)/NMB-005(B) causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum battery life Charge the battery cartridge before completely discharged.
PARTS DESCRIPTION Carrying handle Brightness indicator Brightness change button Power switch button Lighting area change button Hole for padlock Battery cover Cover lock Power cord Hook for power cord Socket cover AC outlet Breaker restart button AC inlet NOTE: The shape of the plug of the power cord varies from country to country. 6 ENGLISH...
To remove the battery cartridge, slide it from the FUNCTIONAL DESCRIPTION appliance while sliding the button on the front of the cartridge. CAUTION: Always be sure that the appli- CAUTION: Always install the battery cartridge ance is switched off and the battery cartridge is fully.
Appliance / battery protection Hole for padlock system For anti-theft of battery cartridges, hole for padlock is provided. The appliance is equipped with the protection system. This system automatically cuts off power to extend appliance and battery life. The appliance will automati- cally stop during operation if the appliance or battery is placed under one of the following conditions.
Changing brightness Using with AC power Press the brightness change button while the appliance is WARNING: Never use the appliance when the operating. The brightness decreases every time you press cord or plug is damaged. the brightness change button. The brightness will return to WARNING: the highest when operating in the lowest brightness.
Insert the plug into the AC inlet of the appliance to be be performed by Makita Authorized or Factory Service powered, and then insert the other end to the AC outlet Centers, always using Makita replacement parts.
Para mantener la SEGURIDAD y FIABILIDAD del pro- ducto, las reparaciones, y cualquier otra tarea de man- tenimiento o ajuste deberán ser realizadas en centros de servicio autorizados o de fábrica Makita, empleando siempre repuestos Makita. ACCESORIOS OPCIONALES PRECAUCIÓN:...