Pc/Av Mode; Source Detection; Key Repeat Time; Power Led On - Samsung U28R550U User Manual

PC/AV Mode

Set PC/AV Mode to AV. The picture size will be enlarged.
This option is useful when you view a movie.
• Set to PC when connected to a PC.
• Set to AV when connected to an AV device.
― Products with a display area of 16:9 or 16:10 are only supported.
― If the product is in HDMI,
DisplayPort mode and the screen says
settings of the source device. press the JOG button to display the Function Key Guide screen and then
select → System → PC/AV Mode → HDMI,

Source Detection

Select either Auto or Manual as the method to recognise input source.
― Not available when
PIP/PBP Mode is set to On.
Check the cable connection and the
DisplayPort → PC or AV.

Key Repeat Time

Control the response rate of a button when the button is pressed.
Acceleration, 1 sec, or 2 sec can be selected. If
when a button is pressed.

Power LED On

Configure the settings to enable or disable the power LED located at the lower part of the product.
• Working: The power LED is on when the product is turned on.
• Stand-by: The power LED is on when the product is turned off.

Reset All

Return all the settings for the product to the default factory settings.
No Repeat is selected, a command responds only once
36