Installation; Attaching The Stand - Samsung U28R550U User Manual

Installation

Attaching the Stand

― Before assembling the product, place the product down on a flat and stable surface so that the screen is
facing downwards.
1
Insert the stand neck into the stand base in the
direction shown in the figure.
5
Hold the main body of the product with your
hand as shown by the figure. Push the assembled
stand into the main body in the direction of the
arrow as shown in the figure.
2
Check that the stand neck is firmly connected.
6
Connect the power supply and the signal cable
as shown in the figure.
Caution
Do not hold the product upside down only by the
stand.
3
Tightly fasten the connecting screw at the
bottom of the stand base.
Caution
Do not press down on the product. There is a risk
of damaging the product.
4
Place the protective Styrofoam (cushion)
included in the package on the floor and place
the product facing down on the Styrofoam, as
shown in the image. If Styrofoam is unavailable,
use a thick sitting mat.
17