Toto WASHLET TCF4914 Series Instruction Manual page 67

Trouble
Water is leaking
from the plumbing
connections
The display on the
remote control goes out
The main unit is
unstable
The main unit
makes a sound
Others
● If any nuts in a connection are loose, fi rmly tighten them with a tool such as a

monkey wrench.
Do not use tools on the water supply
hose connection. Tighten it by hand.
➞ If the water leak does not stop, close the shutoff valve and consult with

TOTO customer service (see contact information on the back cover).
● The display goes out when no button on the remote control is pressed for

about 60 seconds or more.
● There is clearance between the toilet seat cushion and the bowl unit for

activating the seat switch. When you sit on the toilet seat, the toilet seat
subsides slightly to activate the seat switch.
● Are the bolts that anchor the main unit loose?

➞Remove the main unit and then firmly tighten the base plate bolts.

When entering the bathroom
● If "Auto bowl CLEAN" is "ON", you may hear that pre-mist is spraying mist in

the bowl unit to make it more diffi cult for dirt to adhere.
➞You can turn it "OFF".

When using the cleansing (rear cleansing, rear soft cleansing, front cleansing) function
● You can hear the sound of the pump operating while cleansing water is being supplied.

When moving away from the bowl unit after use
● When "Auto power deodorizer" is "ON", operation sounds are made while the

deodorizing power increases for 60 seconds after you stand up from the toilet seat.
➞ You can turn it "OFF".

 ● If "Auto wand CLEAN" is "ON" and you use the cleansing functions (e.g.,Rear cleansing
and Front cleansing), you may hear that the wand is extended and cleaned with "ewater+".
➞ You can turn it "OFF".

● If "Auto bowl CLEAN" is "ON" and you sit on the toilet seat and use the toilet,

you may hear that mist of "ewater+" is sprayed inside the bowl unit.
➞ You can turn it "OFF".

● You may hear that the wand is extended and the remaining water in the product

is drained after "Auto wand CLEAN" and other functions are performed.
● You may hear the fan ventilating the unit. (About 30 minutes)

When not using the product (e.g., at night)
● You may hear the following sounds if "Auto wand CLEAN" or "Auto bowl

CLEAN" is "ON" and if you do not use the cleansing functions (e.g.,Rear
cleansing and Front cleansing) for about 8 hours.
"Auto wand CLEAN": Sound of cleaning the wand with "ewater+"
: Sound of extending the wand and draining remaining
water from the product after operation of functions
"Auto bowl CLEAN": Sound of spraying mist of "ewater+" inside the bowl unit
→You can turn it "OFF".
{For TCF4911E *** , TCF4911 *** }
● Because the body sensor can detect movement through the wall or door in front of

the toilet, the "Auto open/close" and "Auto bowl CLEAN" functions may cause the
toilet to pre-mist, or the lid to open, even when you are outside of the room.
➞You can switch "Auto open/close" and "Auto bowl CLEAN" to OFF.

Please check
Water supply
hose connection
Ref.
Page
-
Water supply
hose
14
9
32,33
44
-
46
44
44
-
44
40,44
67