Table of Contents
Advertisement
•
To assemble the floater, put the
thin end of the floater into the hole
on the lid (fig.a), and assemble
the rubber ring around the floater
(fig.b).
1
2
•
You can also add water to the pot
and start the steam function to help
with the cleaning.
Pressure regulator
•
Hold the handle of pressure
regulator and pull it out gently. Rinse
it under tap water to remove food
residues inside, or use a toothpick.
EN
22
•
Hold the right handle of pressure
regulator and asseamble it back to
the inner lid.
Interior
Inside of the outer lid and the main
body and the heating element:
•
Wipe with damp cloth.
•
Make sure to remove all the food
residues stuck to the All-in-One
cooker.
Note
•
Do not remove the sealing ring by force,
it will leak if not fully assembled.
Exterior
Surface of the outer lid and outside of
the main body:
•
Wipe with a cloth damped with
soap water.
•
Only use soft and dry cloth to
wipe the control panel.
Accessories and inner
pot
Soup ladle and inner pot.
•
Soak in hot water and clean with
sponge.
Advertisement
Table of Contents
