Table of Contents
Advertisement
After approximately 60 days of use, both carbon filters should be replaced. The carbon filters are located at each end of the
Hydroxyl Ozone Generator and can be purchased through your distributor. Replace carbon filters as follows:
WITH THE UNIT UNPLUGGED, place the Hydroxyl
u
Ozone Generator vertically with the controls facing
up and remove the two retaining screws, one on
each side of the Plastic End Cap.
Gently remove the Plastic End Cap, screen and
v
carbon filter. Place used carbon filter in a plastic bag
and dispose of.
Replacing the Carbon Filters
Install the new carbon filter, then replace the screen
w
and plastic end cap.
x
Re-insert the two screws.
Repeat for the other carbon filter located on the
y
opposite side.
IMPORTANT
The unit should never be operated without the screen
or carbon filter in place.
— 9 —
Advertisement
Table of Contents
