Table of Contents
Advertisement
Examine and replace the ozone generator tubes and
y
electrodes if ozone output is low and any damaged
or broken parts, or if the 1 Amp fuse has blown.
Make sure to connect the grounding wire to wire
assembly.
WARNING:
• Make sure the unit is unplugged before replacing fuses.
If the 2 Amp fuse has blown, replace the UV Bulbs as shown on page 10. The 2 Amp fuse is the one in the middle of the
bottom cabinet.
If the 1 Amp fuse has blown, replace the Generator Tubes as shown on page 13. The 1 Amp fuse is the left one on the
bottom cabinet.
WARNING:
• Make sure the unit is unplugged before maintenance is performed.
Cleaning
To clean, use a damp soapy cloth for standard cleaning.
To order replacement parts, contact your distributor or call 1 - 866 - 676 - 9663 for assistance.
Replacing the Generator Tubes
Cleaning
Replacement Parts
Reassemble in reverse order.
U
IMPORTANT:
• Caution should be taken when sliding ozone
generator tube over the counter electrode.
• Do not over tighten ozone generator tube and
electrode screws.
Fuses
— 14 —
Advertisement
Table of Contents
