Table of Contents
Advertisement
Quick Links
c.LOGiC lite-Interface
CI-C1-C20
Compatible with navigation systems
Mercedes Benz
Comand 2.0
Comand APS CD
Product features
• full plug and play multimedia interface
• 1 AV-input with separate IR-control channel
• control of after-market devices, e.g. DVB-T tuner, DVD-player, DVD-changer, ...
• after-market rear-view camera input activation
• automatic switching to rear-view camera input (only from c.LOGiC-mode)
• rear-view camera power (+12V max. 1A)
• power on remote out trigger signal (+12V max. 1A) to switch on connected devices
• video-in-motion
Version 20.09.2017
CI-C1-C20
Advertisement
Table of Contents
Related Manuals for Car-Interface.com CI-C1-C20
Summary of Contents for Car-Interface.com CI-C1-C20
- Page 1 CI-C1-C20 Compatible with navigation systems Mercedes Benz Comand 2.0 Comand APS CD Product features • full plug and play multimedia interface • 1 AV-input with separate IR-control channel • control of after-market devices, e.g. DVB-T tuner, DVD-player, DVD-changer, …...
-
Page 2: Table Of Contents
Activation of the video-in-motion function 4.2. Selecting the c.LOGiC as current AV-source 4.3. Assigning device control 4.4. Button assignment table 4.5. Picture settings 4.6. Audio settings 5. Specifications 6. Connections (Interface-box) Appendix A – Device control table Version 20.09.2017 CI-C1-C20... -
Page 3: Prior To Installation
Take down the SW-version and HW-version of the interface boxes, and store this manual for support purposes. Harness C1C-ME20 Interface-Box C1C-M01 HW_____ SW_____ If remote function for the connected devices shall be used, additionally an IR- remote cable and Y-adapter are needed, see chapter AV-source . Version 20.09.2017 CI-C1-C20... -
Page 4: Check Compatibility Of Vehicle And Accessories
(W463) til 03/2007, ML-Class (W163) all jears, S-Class (W220) from 09/2002 til 09/2003, SL-Class (R230) til 06/2004 Navigation Comand 2.0, Comand APS CD Limitations Factory-TV-tuner Must NOT be installed. After-market rear-view cam Automatic switching to camera only works from c.LOGiC mode Version 20.09.2017 CI-C1-C20... -
Page 5: Connection Schema
Switch off ignition and disconnect the vehicle’s battery! If according to factory rules disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a resistor lead. Version 20.09.2017 CI-C1-C20... -
Page 6: Connections To The Comand
Connect loose black wire of C1C-ME20 to pin 8 of chamber A (ground). Plug female 18pin AMP connector of vehicle harness into C2 slot of Comand’s male system connector. Plug female 8pin C1 connector of harness C1C-ME20 into C1 slot of Comand’s male system connector. Version 20.09.2017 CI-C1-C20... -
Page 7: Interconnecting Interface-Box And Harnesses
It is possible to connect one after-market AV-source and an after-market rear-view camera to the c.LOGiC Interface. Before final installation of the peripheral devices, we recommend to test-run the c.LOGiC functions to detect incompatibility of vehicle, navigation, factory accessories or peripheral devices as soon as possible. Version 20.09.2017 CI-C1-C20... -
Page 8: Av-Source
IR-Port of the connected device, the controls of navigation AND device’s IR-sensor can be connected and used simultaneously. Installation of the IR-sensor is recommended as the controls via navigation are limited, and not all functions may be covered. Version 20.09.2017 CI-C1-C20... -
Page 9: After-Market Rear-View Camera
Note: On vehicles with previously installed factory TV-tuner an extra video-in-motion interface might be necessary. It is not possible to determine this prior to testing. 4.2. Selecting the c.LOGiC as current AV-source Push TV button of Comand to choose the c.LOGiC as current AV-source. Version 20.09.2017 CI-C1-C20... -
Page 10: Assigning Device Control
The function description equals the remote control buttons of the optional c.LOGiC remote control or the additional device. On the additional device the writing may vary (e.g. AV instead of Source). Version 20.09.2017 CI-C1-C20... -
Page 11: Picture Settings
Press the right knob to change from brightness to colour and contrast (after contrast, the interface starts again with brightness). Turn the right knob to change the current picture value. To quit the settings menu press button 13. Version 20.09.2017 CI-C1-C20... -
Page 12: Audio Settings
Measurements (box only) B x H x T 106 x 30 x 71 mm 6. Connections (Interface-box) Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ® of their corresponding legal owners. Version 20.09.2017 CI-C1-C20...