Hoshizaki SRK-15J Instruction Manual page 35

17) From the tee on the drain hose, blow out the drain valve using compressed air or carbon
dioxide.
18) Move the service switch to the "CIRC." position and the control switch to the "OFF"
position.
19) Reconnect the thermistor to the K3 connector on the control board. Reconnect the water
pump connector.
20) Close the inlet water supply line drain valve.
21) Remove all ice from the dispenser unit/storage bin and clean the dispenser unit/storage
bin liner using a neutral cleaner. Rinse thoroughly after cleaning.
22) Turn off the power supply.
23) Replace all removed parts and panels in their correct positions.
Harvest Water Valve Hose
Suction Hose
Fig. 21
35
Harvest Water Valve
Wash Valve
Fill Water Valve Hose
Fill Water Valve
Float Switch Vent Hose
Drain Valve
Drain Hose Tee