Hoshizaki SRK-15J Instruction Manual page 14

5a) Dispenser Unit: Follow the dispenser unit's instructions for securing the icemaker to
the dispenser unit. If no instructions are available, secure the icemaker to the dispenser
unit using the mounting brackets provided. Rotate the mounting brackets so that
they fit flush to the dispensing unit. See Fig. 6a. Secure the mounting brackets to the
icemaker with the bolts provided. Secure the mounting brackets to the dispensing unit
with self-tapping screws (not provided). NOTICE! Use care to avoid damage to the
dispenser unit components when attaching the mounting brackets. Seal the outer
perimeter of the icemaker to the dispenser unit with RTV-748 sealant (provided) or
equivalent.
5b) Storage Bin: Secure the icemaker to the storage bin using the 2 mounting brackets and
the bolts provided. See Fig. 6b. Seal the outer perimeter of the icemaker to the storage
bin with RTV-748 sealant (provided) or equivalent.
6) Level the icemaker and dispensing unit/storage bin in both the left-to-right and
front-to-rear directions. If using a storage bin, adjust the storage bin legs to make the
icemaker level.
Dispenser Unit Application
Icemaker
Mounting
Brackets
Bolts
Dispenser
Self-Tapping
Unit
Screws
(Not Provided)
Seal the Outer Perimeter with
RTV-748 Sealant or Equivalent
Fig. 6a
Storage Bin Application
14
Icemaker
Mounting
Brackets
Bolts
Storage Bin
Fig. 6b