Table of Contents
Advertisement
BIOS flash process begins. (Figure 2-16)
Figure 2-16. Updating Flash ROM Blocks
7. Flash is complete when the message, Flash Programming Complete is shown.
System will restart automatically when finished.
NOTE:
NOTE:
If AC power is not connected, the following message is shown (Figure 2-17). Plug in the
AC power to continue.
Figure 2-17. AC Power Warning
System Utilities
0.05
0.08
Warning: No AC power connect
1.4c
X.XXx
ZRJ
XXXXXXXX
XXXXXXXX
ZRJ
XXXXXXXX
XXXXXXXX
2-17
Advertisement
Table of Contents
