Table of Contents
Advertisement
Getting Started
The flowchart
(Figure
sequence. Observe the order of the sequence to avoid damage to any of the hardware
components.
Perform the following prior to performing any maintenance procedures:
1. Remove external power (A) from the system. (Figure 3-2)
2. Remove all peripherals cables and from system.
Figure 3-2. AC Adapter
3. Place system on a stable work surface.
4. Move battery disconnect switch (B) on logic door to remove power. (Figure 3-3)
Figure 3-3. Battery Disconnect Switch
Machine Maintenance Procedures
3-1) identifies sections illustrating the entire removal and install
A
B
0
3-7
Advertisement
Table of Contents
