Mainboard Removal
Prerequisite:
1. Disconnect the following module cables from the mainboard connectors: (Figure 3-70)
Bluetooth module cable (A) from mainboard connector (a)
USB module cable (B) from mainboard connector (b)
DT board cable (C) from mainboard connector (c)
a
Figure 3-70. Mainboard Connectors
2. Remove screws (D) from lower cover. (Figure 3-71)
Figure 3-71. Mainboard Screws
3-54
LCD Module Removal
A
b
B
c
C
Machine Maintenance Procedures
0
D
D