Function Of Control Button - LG LD-2120W Owner's Manual

FUNCTION OF CONTROL BUTTON

TIME LEFT
• Before starting, the display window shows the running time of
the selected program.
• After starting, the display window shows the remaining time.
• If the dishwasher has a trouble, the trouble type is displayed.
: Drainage trouble
: Problem of overfilling water
: Water inlet trouble
: Water leakage trouble
: Heater trouble
If this error letters are displayed, please refer to the trouble
shooting guide page 19 and follow the guide.
※ "
" : No error message (See page 16)
CHILD LOCK
• Used to lock or unlock
the control buttons to
prevent all the setting
from being changed by
a child.
• This function is
automatically canceled
when power failure
occur.
• For locking/ unlocking,
press Auto and Eco
button for a few
seconds simultaneously.
BEEP ON/OFF
• The dishwasher must be
switched on.
• The beep on/off function can be
set by pressing the Quick and
Pre-wash button
simultaneously for a few
seconds. then, a "on" will appear
in the time display.
• The beep on/off function is
automatically canceled when
power failure occur.
DELAY START
• If you want to delay
the start of selected
program, press this
button before
pressing program
button.
• Pressing the delay
time will increase
time by 1 hour.
• The delay start time
can be adjusted from
1 hour to 19 hours.
PROGRAM
• When you want
to select
program, press
each button.
10
INDICATOR
• Child Lock
• Refill with
rinse aid
POWER
• For operating, press
this button first for
power on.
• After operating, this
button automatically
switches off for safety
and energy saving.
• In case of irregular
surge disturbance to
the machine, the power
may be automatically
turned off for safety.